Products
361-372 of 921 results
Model no.: QS 23 G 227
API 6A Ring Joint Gasket, Carbon Steel, 120HB, RX Series, RX31 for 3 Inch 3000# Flanges High Pressure Sealing Service, With Zinc Coating
Model no.: QS 23 G 225
Type E Dielectric Flange Bolt Kit, Klingersil C4400, Dieletric Strength ASTM D149-95a, Manufactured with Aramid Fiber Reinforced with a Nitrile Binder. 6 Inch, 150LB, with G10 Sleeve and Washers and ZPS
Model no.: C4400 Dielectric Flange Kit
C4400 Dielectric Flange Kit, Klingersil,Type E with Bolt Holes, Complete with G10 Sleeve and Washers and ZPS, Size 4 Inch, Pressure 150LB, Working Environment Resistant to Oils, Water, Steam, Gases, Salt Solutions etc.
Model no.: QS 23 G 221
API 6A RX Joint Gasket, Ring Code RX 31, Material CS, Max Hardness 120 HB, With Anticorrosion Zinc Coating, For High Pressure Sealing Service
Model no.: QS 23 G 219
Carbon Steel Ring Joint Gasket, R Series, R31, Low Carbon Steel, Surface Treatment Zinc Plated, Hardness Max 120 HB, Standard API 6A
Model no.: QS 23 F 331
Hexagonal Head Jack Screw, Material ASTM A320 B8M CL.2, 316SS, ANSI B18.2.1, Size 1-1/2 Inch, Length: 95mm, Thread Unified National Coarse 8UN 2A
Model no.: QS 23 G 217
Insulation Flange Gasket Kit, Type E, G10 Carrier, PTFE Quad Seal, 2 Inch, 150LB, G10 Sleeve and Washers, Zinc Coating Steel Washers, For Galvanic Corrosion Protection and Electrical Insulation.
Model no.: QS 23 F 329
316SS Hex Head Cap Screw, Hex Head Bolt, ANSI B18.2.1, Thread 7 UN Class 2A, Partial Thread, Size 1-1/8 Inch, Length 85mm, Material ASTM A193 B8M Class 2, For High Pressure Valve Installation
Model no.: QS 23 F 327
API 20F A453 Gr.660 Bolting, Fully Thread Stud with Two Heavy Hex Nuts, Size 3 Inch, Length 900mm, Material Grade B, Thread 8 UN, For High Temperature Service
Model no.: QS 23 F 325
B637 UNS N07718 Stud Bolt, With Two Nuts, Heat Treatment Solid Solution 1000℃ and Precipitation Hardening 720℃, Nickel Alloy Stud Bolt, M36, Length 360mm, ISO 261, For High Temperature Service
Model no.: QS 23 F 323
A453 Gr 660 Stud Bolt, Material Grade Class A, Standard ISO 261, Fully Thread Stud Bolt, Impact Test at -196℃, Size M80, Length 1000mm, Thread Class 6G
Model no.: QS 23 F 321
Alloy Steel Stud Bolt, Material ASTM A193 B7, Thread 8 UN, Standard ANSI B18.31.2, Size 1-1/8 Inch, Length 230mm, Surface Coating PTFE 1424 Blue, Fully Thread Stud Bolt for Flanges, Joints and Valves Installation.