Page 3 of Spiral Wound Gasket Manufacturer China

Insulating Flange Kits, 2 Inch, Thermoseal, C4430 Retainer, Non-asbestos, 150LB, G10 Sleeves and Washers and ZPS, C-4430 is Resistant to Water and Steam at Higher Temperatures As Well As Oils, Gases, Fuels, etc.

Type D Insulating Gasket Kit, Material Phenolic Retainer, 10 Inch, 600LB, RTJ, Oval, Complete with Isolating and Sealing Ring, Full Length Bolt Isolating Sleeves, and Two 1/8” Thick Steel Washer

Garlock Gylon 3500 Flat Gasket, Material PTFE with Silica, ASME B16.20, 300LB, Thickness 3.2mm, 1/4 Inch, RF, Service Temperature Range Min. -268℃, Max. +260℃.

Type F Insulation Gasket Kit, Size 6 Inch, 300LB, RF, With G11 Sleeves and Washers and ZPS Washers, Retainer Garlock Gasket Gylon 3500, For High Corrosion and High Temperature Service

Flange Insulation Kits For Cathodic Protection, Retainer Material Garlock Gylon 3500, Complete with G11 Sleeves and Insulation Washers, ZPS Washers, 8 Inch, 300LB, For ASME B16.5 RF Flange

Graphite Reinforce Gasket, Size DN200, Pressure PN25, RF, Manufacture EN 1514-1, Material RSB, 304, Thickness 3mm, Suitable for Steam, Mineral Oils, Heat Transfer Oils, Hydraulic Oil, Fuel, Water, etc.

Oval RTJ Gasket, Size R63, Material Carbon Steel, Surface Treatment Zinc-plated, Max Hardness 120HB, Shape Oval, Standard ANSI B16.20

Garlock Flat Gasket, Size 32 Inch, Pressure 150LB, Gylon 3500, Standard ASME B16.47 B, Composition PTFE With Silica, Liquid Services Strong Acids, Hydrocarbons, Chlorine, Cryogenics etc

Dielectric Flange Bolt Kit, 6 Inch, 150LB, Garlock Gylon 3500 Gasket, PTFE With Silica, Fluid Services Strong Acids / Steam /Solvents etc, Complete with G11 Sleeve, G11 Washers and ZPS

Insulation Kit Type F, Size 3 Inch, 300 Class, Gasket Garlock Gylon 3500, G11 Sleeves and Washers, With Zinc Plated Washers, Standard ASME B16.5 Flange

Bx154 Ring Gasket, Material Carbon Steel, Max Hardness 120HB, Surface Treatment Zinc Plated, For High Pressure and High Temperature Seal

Non-Asbestos Gasket, Material Tesnit BA-U, Size DN200, Pressure PN16, Manufacture Standard EN1514-1, Gasket Thickness 2mm