Page 14 of Spiral Wound Gasket Manufacturer China

Flat EPDM Gasket as per ASME B16.21 use for Raised Face Flange, Size 12 Inch, DN300, Pressure 150LB, Material EPDM, Thickness 3 mm.

CS Outer Ring Gasket as per ASME B16.20, Size 12 Inch, DN300, Class 150LB, SS304 Inner Ring, SS304 Hoop with Flexible Graphite Filler.

CGI Type Spiral Wound Gasket as per ASME B16.20, Size 12 Inch, DN300, Pressure 150LB, SS304 Hoop with Flexible Graphite Filler, Anti-corrosion Zinc Coating.

ASME B16.20 Gasket Type CGI use for RF Face Flange, Size 10 Inch, DN250, Class 150LB, with Carbon Steel Outer Ring and SS304 Inner Ring, Anti-corrosion Zinc Coating.

ASME B16.21 PTFE Flat Gasket for Raised Face Flange, Size 8 Inch, Pressure 150LB, Thickness 1.5mm, Material Polytetrafluoroethylene.

ASME B16.21 EPDM Gasket for Flat Face Flange, Size 8 Inch, DN200, Class 150LB, Material EPDM, Thickness 3 mm.

ASME B16.21 Flat PTFE Gasket use for Raised Face Flange, Size 8 Inch, DN200, Class 150, Material PTFE,Thickness 3 mm.

ANSI B16.20 Gasket, with SS Inner and Outer Ring, 2 Inch, 150LB, with Carbon Steel Outer Ring and SS304 Inner Ring, Protection Coating Zinc.

Oval Spiral Wound Gasket is a Boiler Dome Gasket, Size 16 Inch x 12 Inch, Thickness 1/4 Inch, Material AISI Stainless Steel 304, Graphite Filler, Supplier in China

Non-rounded Spiral wound Gasket as Customer's Requirement, Size 16 Inch x 12 Inch, Material AISI 304 Stainless Steel and Graphite, Thickness 0.25 Inch.

Special Material Spiral Wound Gasket as per ASME B16.47 B Series, Size 36 Inch, DN900, Pressure 150LB, Stainless Steel 347 Inner Ring, Stainless Steel 347 Outer Ring, SS347 Hoop with 98% Mica Filler.

Low Stress Spiral Wound Gasket as per ASME B16.20, Size 2 Inch, DN50, Pressure 150LB, Stainless Steel 304 Inner Ring, SS304 Hoop with Graphite Filler, Carbon Steel Outer Ring.